
AP Statistics probability formulas: the rules to know and when to use each




Table of contents
- What probability measures
- Three distinctions that choose the formula
- The probability rules
- Addition rule
- Multiplication rule
- Conditional probability
- Complement rule and "at least one"
- Random variables and distributions
- Formulas at a glance
- A worked example from a real exam
- How to study probability
- Key takeaways
Probability is the foundation of AP Statistics: Unit 2, Probability, Random Variables, and Probability Distributions, carries 15–25% of the exam, and the same ideas sit under every inference procedure after it. Only a handful of formulas are on the exam reference sheet. The rest you need to know how to reason out, so the skill being tested is choosing the right rule for the wording of a question, not recalling an equation.
The rules to know are the addition rule, the multiplication rule, conditional probability, the complement rule, and the mean and standard deviation of discrete, binomial and geometric random variables. Only the addition rule, conditional probability, the discrete formulas and the binomial formulas are printed on the official reference sheet, which our AP Stats formula sheet guide walks through. The multiplication rule, the complement rule and the geometric formulas you have to bring yourself.
What probability measures
The probability of an event is a number from 0 (impossible) to 1 (certain) that describes how often the event happens over many repeated trials. It can be written as a decimal, a fraction or a percentage: a fair coin lands heads with probability 0.5, 1/2 or 50%.
Roll a fair die 120 times and each face has probability 1/6, so you expect each number about 20 times (120 × 1/6 = 20). Your actual count will rarely be exactly 20, but as the number of rolls grows, the observed proportion settles toward the theoretical probability. This is the law of large numbers, and it is why a simulation with many trials is a legitimate way to estimate a probability on the exam.
Three distinctions that choose the formula
Most mistakes on probability questions come from treating two events as one kind when they are another. Check these three first.
- Mutually exclusive events cannot happen at the same time. Drawing a single card that is a queen and a king is impossible, so those events are mutually exclusive. Drawing a card that is red and an ace is possible, so those are not.
- Independent events do not affect each other’s probability. Two coin flips are independent. Drawing stones from a bag without replacing them is not: after you remove a red stone, the chance of a red on the next draw changes. Drawing with replacement keeps the draws independent.
- Mutually exclusive and independent are different ideas. If A and B are mutually exclusive and both have a positive probability, they are never independent, because knowing that A happened tells you B did not. Do not treat the two terms as synonyms.
The probability rules
Addition rule
The addition rule gives the probability that A or B, or both, happens. Subtract the overlap so it is not counted twice:
P(A ∪ B) = P(A) + P(B) − P(A ∩ B)
The symbol ∪ means "union" (in A, in B, or in both) and ∩ means "intersection" (in both). When A and B are mutually exclusive, P(A ∩ B) = 0 and the rule shortens to P(A ∪ B) = P(A) + P(B). Wording such as "cannot both occur" signals that shortcut.
Multiplication rule
The multiplication rule gives the probability that A and B both happen. It is not printed on the reference sheet, but it follows from the conditional probability formula below:
P(A ∩ B) = P(A) × P(B | A)
The vertical bar reads "given". If A and B are independent, P(B | A) is just P(B), and the rule becomes P(A ∩ B) = P(A) × P(B). For example, the probability of rolling a 1 on a die and flipping heads on a coin is 1/6 × 1/2 = 1/12. When the question mentions drawing without replacement, use the version with P(B | A), because the sample space changes after the first draw.
Conditional probability
Conditional probability is the chance of one event given that another has occurred. It is on the reference sheet:
P(A | B) = P(A ∩ B) / P(B)
Given that B happened, you restrict attention to the outcomes in B and ask what fraction of them are also in A. Two-way tables and tree diagrams are the usual setting: read the row or column for the "given" condition and divide within it. The theorem named after Thomas Bayes is this same idea written the other way round, P(A | B) = P(B | A) × P(A) / P(B). It is not printed on the reference sheet, but tree diagram questions ask for the same reasoning.
Complement rule and "at least one"
The complement of an event is everything that is not the event, so P(not A) = 1 − P(A). It is usually the fastest route to an "at least one" question. For n independent trials that each succeed with probability p:
P(at least one success) = 1 − (1 − p)^n
Compute the probability of no successes, then subtract from 1, instead of adding up every case with one or more successes.
Random variables and distributions
A random variable assigns a number to each outcome of a random process, and a probability distribution lists the values it can take with their probabilities. These formulas turn up in free-response questions and the reference sheet prints the first two groups.
- Discrete random variable X: the mean (expected value) is μ = Σ xᵢ · P(xᵢ), and the standard deviation is σ = √[Σ (xᵢ − μ)² · P(xᵢ)].
- Binomial distribution: use it when there is a fixed number of independent trials n, each with two outcomes and the same probability of success p. The mean is μ = np and the standard deviation is σ = √[np(1 − p)]. The probability of exactly x successes is C(n, x) · p^x · (1 − p)^(n − x), where C(n, x) = n! / [x!(n − x)!] counts the ways to choose which trials succeed.
- Geometric distribution: use it when you count the trials up to and including the first success. The mean is 1/p and the standard deviation is √(1 − p) / p. These are not on the reference sheet.
Combinations count selections where order does not matter, which is what the binomial formula needs. Permutations, which count arrangements where order matters, rarely come up in AP Statistics.
Formulas at a glance
Rule | Formula | On the reference sheet? |
|---|---|---|
Addition rule | P(A ∪ B) = P(A) + P(B) − P(A ∩ B) | Yes |
Addition rule, mutually exclusive | P(A ∪ B) = P(A) + P(B) | No (set the overlap to 0) |
Multiplication rule | P(A ∩ B) = P(A) × P(B | A) | No |
Multiplication rule, independent | P(A ∩ B) = P(A) × P(B) | No |
Conditional probability | P(A | B) = P(A ∩ B) / P(B) | Yes |
Complement rule | P(not A) = 1 − P(A) | No |
At least one success in n trials | 1 − (1 − p)^n | No |
Discrete random variable | μ = Σ xᵢ · P(xᵢ); σ = √[Σ (xᵢ − μ)² · P(xᵢ)] | Yes |
Binomial | μ = np; σ = √[np(1 − p)] | Yes |
Geometric | μ = 1/p; σ = √(1 − p) / p | No |
A worked example from a real exam
Question 5 on the 2025 AP Statistics free-response section gives a distribution of the number of bedrooms in a sample of newly built houses in a fictional country:
- 1 bedroom: 0.12
- 2 bedrooms: 0.22
- 3 bedrooms: 0.28
- 4 bedrooms: 0.22
- 5 bedrooms: 0.14
- 6 bedrooms: 0.02
Part A asks for the probability that a randomly selected house had fewer than 3 bedrooms. Let X be the number of bedrooms. A house with fewer than 3 bedrooms has 1 or 2, and those two outcomes cannot both happen, so the simplified addition rule applies: P(X < 3) = P(X = 1) + P(X = 2) = 0.12 + 0.22 = 0.34.
The next part asks for the mean number of bedrooms, which uses the discrete formula from the reference sheet: μ = 1(0.12) + 2(0.22) + 3(0.28) + 4(0.22) + 5(0.14) + 6(0.02) = 3.10 bedrooms. The scoring guidelines require you to show at least two terms of that sum, so write the pattern out instead of giving only the answer.
How to study probability
- Learn the vocabulary first. Terms such as "given", "both", "at least one", "with replacement" and "cannot occur at the same time" tell you which rule to use. Our AP Statistics vocabulary list covers the key terms.
- Sort problems by rule before solving them. For each practice question, name the rule first (addition, multiplication, conditional, complement, binomial, geometric), then substitute.
- Know which formulas the sheet gives you. Use the sheet to check a formula, not to find out which one you need. You need the multiplication rule, the complement rule and the geometric formulas from memory.
- Practice free-response answers in writing. Define your random variable, name the rule, show the substitution and state the answer in context, as the 2025 scoring guidelines reward.
- Place the topic in the course. Our guide to the AP Statistics units shows how Unit 2 leads into the inference units, and the p-value from a z-score guide shows probability applied in a hypothesis test.
If you want to see where a given raw score lands, try the AP Statistics score calculator, or read the exam information for the format and dates.
Key takeaways
- Unit 2 is 15–25% of the AP Statistics exam, and probability underlies the inference units that follow.
- The reference sheet prints the addition rule, conditional probability, the discrete mean and standard deviation, and the binomial formulas. The multiplication rule, the complement rule and the geometric formulas are not on it.
- Decide first whether events are mutually exclusive, independent, or neither, then pick the rule.
- For "at least one" questions, subtract the probability of none from 1.
- On free-response questions, show the formula’s pattern and state the answer in context.